module strength
英 [ˈmɒdjuːl streŋθ]
美 [ˈmɑːdʒuːl streŋθ]
网络 模块强度
双语例句
- The relationships between module, breaking strength and elongation at break and tear force of trapezoidal shaped polyurethane coated fabric have been studied in this paper.
研究了聚氨酯涂层织物的模量、断裂强力及断裂伸长率与其梯形撕裂强力之间的关系。 - In alkaline mediums, bending module is very blunt compared with bending strength, bending module keeps close to the originality while bending strength declines gradually.
碱性介质中，复合材料弯曲强度降低，而弯曲模量几乎保持不变。 - Analysis on Influence Factors of the Large Module Gear-Rack Strength
大模数齿轮齿条承载能力影响因素分析 - The initial module, strength at break, breaking extension after treatment were measured and compared with that of the control sample.
测定了处理后驼毛的减量率、直径减小率、初始模量、断裂强力和断裂延伸度。 - The piezoelectric structural systems like many other structural systems contain many stochastic factors. For example, the loads which act on the structures, the trim size of the components, the elastic module of the structural material, and their breakdown strength are stochastic;
压电结构系统像其他结构系统一样，有很多随机性的因素，例如结构所承受的荷载、构件的实际尺寸、结构材料的弹性模量、及其破坏强度都是随机的。 - Under the condition of static tension, the module of elasticity E, yield strength σ_ ( 0.2) and tensile strength σ_b reduce along with the rising of temperature.
静态拉伸时，弹性模量E、屈服强度σ（0.2）及抗拉强度σb，均随温度的升高而下降。 - The decay curves of dynamic elastic module and dynamic shear module are presented on the basis of the decay characteristics of dynamic module. Besides, the strength resisting liquefaction is studied.
通过研究液化过程中动模量的衰减特性，得到了动弹性模量和动剪切模量随应变发展的衰减特性曲线，并研究了砂土的抗液化强度。 - The optimum design method based on the reliability is presented to the stochastic structure systems ( i.e.the sectional area, length, elastic module and strength of the structural member are random variables) under the random loads.
提出了以梁板（薄板）为基体的随机结构系统（即结构元件的面积、长度、弹性模量和强度等均为随机变量）在随机载荷作用下，基于可靠性的优化设计方法。 - Combined with the measuring of the module of elasticity of the coating, the bending strength was also calculated for the bending specimens applying the composite model.
根据对Ni基合金涂层杨氏弹性模量的测定，按复合材料模型计算了抗弯强度。 - Concrete elasticity module and concrete strength under uniaxial tension and compression are gained. Computer strength method was developed.
计算得到混凝土的弹性模量、单轴抗拉和抗压强度等宏观力学参数，发展了混凝土计算强度。 - The special climate condition is crucial for the un-uniform distribution of dynamic elastic module of the soil strength;
在特殊的气候条件下路基土体的动弹性模量由最初的均匀分布逐渐过渡到不均匀状态； - The most similar module gives the class and strength of the odor.
在多个模块中，气味的类别与强度由那个相似程度最高的模块所决定。 - Work done above fills several gaps in study on geometric microstructure of the material, initiates a new way to analyze and predict the material's module and strength.
上述工作填补了该材料几何细观结构研究的一些空白，开辟了该材料模量和强度研究的新途径。 - The wear resistance of the CuZnAl ( RE) shape memory alloy is mainly attributable to super-elasticity, nonlinear elastic module, high yield strength, and stress induced martensite, martensitic preferred orientation;
合金之所以耐磨主要因为超弹性、弹性模量非线性、高屈服强度、以及应力诱发马氏体、马氏体择优取向。 - Using ANSYS optimization design module to the frame and lift system to optimize the design. The optimal design in strength and stiffness properties were improved than the original design. Weight also has obvious reduced, reached the goal of optimal design.
利用ANSYS的优化设计模块对机架和升降机构进行优化设计，得出的最优设计较原始设计强度和刚度性能均有所提高，重量减轻效果也非常明显，达到了优化设计的目的。 - Structural statics analysis module using ANSYS conducts the strength analysis of the steering knuckle model.
利用ANSYS结构静力学分析模块进行了转向节强度分析。 - First we modify this module in order to simulate fast handoff procedure and introduce mechanism to detect wireless signal strength so as to make dynamic choice among access routers.
我们对该模型进行了修改使之能够模拟移动快速切换过程，同时引入对无线信号强度的检测实现接入路由器的动态选择。 - Subjective test module for field testing provides intuitive and effective test results for terrestrial digital television network layout and coverage. The design of objective test module has done good preliminary work for the following field strength test.
其中，主观测试模块的实地测试为地面数字电视的网络规划和覆盖提供了直观有效的测试结果，客观测试模块的设计为进一步开展的场强测量工作做了很好的铺垫。 - All the above work improved the KMAS multi-field hot forming simulation module, the simulation results can provide accurate prediction for the final formability and microstructure of the high strength steel.
以上工作完善了KMAS热成形热、力、相变多场耦合数值模拟模块，数值分析结果为准确预测板料最终成形性和微观组织情况提供有力依据。 - System also had forecast analysis module of compression strength, which could show us the variation of the compression strength in different relative humidity, and be useful for application.
系统同时还设置了抗压强度预测分析模块，预测纸箱在不同的环境湿度下纸箱的抗压强度，对纸箱的实际使用具有很高的价值。 - And the nephogram of fatigue life and fatigue safety factor is obtained through the post-processing module of ANSYS. And the fatigue strength of specific structure is determined through it.
最后通过ANSYS后处理模块得到强夯机臂架的疲劳寿命云图和疲劳安全系数云图，从而确定各局部结构的疲劳强度，为改进结构、提高疲劳寿命提供理论基础。 - The rock-slag mixture has conducted the more comprehensive experimental study, including the compaction test, the CBR experiment, the snapping back module experiment, the compressive strength test, immerses broken experimental and the inflation quantity experiment.
对山渣料进行了较全面的试验研究，包括击实试验、CBR试验、回弹模量试验、抗压强度试验、浸水破碎试验及膨胀量试验。 - But the state of coarse grain subgrade system is expressed by the indexes of its density, module and shearing strength. The change of system state can be represented by its change of structure resistance on macroscopic view.
而粗粒土路基系统的状态可由其密度、模量和抗剪强度指标来表征，系统状态的变化在宏观上可以用其结构抗力的变化来表达。 - When the content of the ( NH2) 4PcCu nanograins is 0.8%, the tensile strength, elastic module and impact strength of the PA6/ ( NH2) 4PcCu nanocomposites increase 12%, 24% and 139% than pure PA6.
当尼龙6/四氨基铜钛菁纳米复合材料中的纳米粒子含量为0.8%时，纳米复合材料的拉伸强度、拉伸弹性模量和冲击强度比纯尼龙6分别提高了12%、24%和139%。